Just about every IP address can be assigned to specified interfaces or ports, Url Aggregation Groups (LAGs), or Digital Nearby Area Networks (VLANs).
To remotely handle the machine, an IP address should be outlined to accessibility the change. This makes it possible for you to very easily configure or troubleshoot the machine through the web-primarily based utility, Telnet, or Safe Shell (SSH). The IP deal with of the change can be manually configured or immediately acquired from a Dynamic Host Configuration Protocol (DHCP) server. If there are no DHCP servers offered, the switch will use its manufacturing facility default IP deal with which is 192. 168. 1. 254. This report delivers guidelines on how to https://my-ips.co/ configure the IP deal with configurations of your change through the Command Line Interface (CLI). Applicable Gadgets. Sx350 Sequence SG350X Collection Sx500 Series Sx550X Series. Software Model. 1. 4. 7. 05 – Sx500 2. two. 8. 4 – Sx350, SG350X, Sx550X. Configure the IP Address of the Change as a result of the CLI. Important: If your change is in a person of the stacking modes with a Backup Master present, it is advisable to configure a static IP deal with to reduce disconnecting from the network all through a Stacking Grasp switchover.
This is for the reason that when the backup grasp normally takes management of the stack, when applying DHCP, it might get a different IP deal with than the one particular that was acquired by the authentic learn-enabled unit of the stack. Configure Static IP Handle. In this circumstance, the swap is set up without the need of the availability of a DHCP server. Follow the measures beneath to configure a static IP handle on the change:Step 1. Hook up your computer right to the swap working with a serial cable. Step 2. Log in to the switch console.
The default username and password is cisco/cisco. If you have configured a new username or password, enter the qualifications in its place. Note: In this instance, SG350X-24 24-Port Gigabit Stackable Managed Switch is employed. Step three.
From the Privileged EXEC method of the swap, enter the Worldwide Configuration mode by coming into the following:SG350X# configure. Note: the configure command is equivalent to configure terminal. Step 4. In the Global Configuration manner, enter the interface context by coming into the following:SG350X(config)# interface [interface-id | vlan-id. Note: In this illustration, interface vlan one is employed. VLAN one is the default VLAN of the switch. Step five. Enter the IP tackle interface configuration command to define an IP address for an interface by getting into possibly of the following:ip address [ip-tackle] mask | prefix-length >> – Use the reload command to reload the change instantly. ip address [ip-address] mask | prefix-size >> [default-gateway-ip-address] – Use the reload > command to specify scheduled swap reload. The selections are:ip address – Specifies the IP tackle.
mask – Specifies the network mask of the IP tackle.
prefix-duration – Specifies the amount of bits that comprise the IP address prefix. The prefix size should be preceded by a forward slash (/). The vary is 8 to 30. SG350X(config-if)# ip handle 192. 168. 100. 201 255. 255. 255. Note: In this illustration, the IP tackle utilised is 192. 168. one hundred. 201 with 255. 255. 255. as mask. Step six. (Optional) To remove an IP tackle from an interface, use the no type of the IP address command by moving into the next:SG350X(config-if)# no ip handle.